Stragnik-3 Aerosol Fire Extinguishing Generator

Designed for rapid fire suppression of class A (including A2 - plasma combustion), B, C, and E fires in conditionally sealed spaces, including electrical installations and equipment under voltage up to 35 kV, as well as local and surface fires.

Application Methods:
1. Directed aerosol stream application to fire sources (e.g., extinguishing burning clothes on a person).
2. Deployment into conditionally sealed spaces (e.g., electrical cabinets, technological niches, etc.).
3. Creating a smoke screen for masking or evacuation purposes.

Extinguishing Mechanism:

Fire suppression is achieved by chemical inhibition of oxidation chain reactions in the plasma combustion zone using fine dispersed alkali metal salts. The device is manually activated using a friction-based ignition mechanism. The aerosol is discharged along the generator’s axis, directed at the fire source from the windward side.

Portable Aerosol Fire Extinguishing Generators “Stragnik" Series

Technical Specifications

Stragnik-3
• Maximum protected volume (conditionally sealed room) / local surface fire area:
1.5m³ / 0.35m³
• Activation delay time, sec:
5±1
• Aerosol discharge duration over full temperature range, sec:
80 (+5/-15)
• Mass of charged generator (with/without handle), g:
320/240
• Mass of aerosol-forming compound in the charged generator, g:
80±7.0
• Dimensions:
• Length, mm: 380±10
• Diameter, mm: 46±2

Storage & Service Life: 10 years

Fire & Rescue Equipment

Usage Instructions:
1. Pull out the safety pin (ring).
2. Press, twist, and remove the cap.
3. Aim the aerosol stream at the fire source from the windward side.